Nitrile examination Gloves Specifications

• Product:   Powder Free Nitrile Gloves, Non-sterile; Micro-textured Finish; Ambidextrous; Disposable; M = 3.5 +/- 0.2gm 
• Material:   Acrylonitrile Butadiene Synthetic Rubber Latex 
• Cuff:  Beaded
• Sizes:   Small, Medium, Large, Extra-Large 
• Standard:    Meets the requirements of ASTM D6319-10 (Standard specification for Nitrile Examination Gloves) 
• Packaging:   100 pieces gloves (by weight) per dispenser box 

  Gloves are sampled at random and inspected in accordance with ISO2859-1:1999 based on batch size. The inspection levels and Acceptance Quality Levels (AQL) shall conform to specification as shown below or as agreed between the purchaser and the supplier.

Samples are inspected/tested as per ASTM D6319-10.

Characteristic Requirements

     Dimension:  Inspection Level S-2, AQL 4.0

     Freedom from holes:  Inspection Level G-1, AQL 1.5

     Physical Properties:  Inspection Level S-2, AQL 4.0

Visual Defects

     Major:  Inspection Level G-1, AQL 2.5

     Minor:  Inspection Level G-1, AQL 4.0

     Packaging & Labelling:  Inspection Level S-2, AQL 4.0

Small:   3.1  +/- 0.2g; Range 2.9-3.3g

Medium:   3.5 +/- .0.2g:  Range 3.3-3.7g

Large:   3.9 +/- 0.2g; Range 3.7-4.1g

Extra Large:  4.3 +/- 0.2g; Range 4.1-4.5g

Small:   85mm (ASTM D6319-10:  80)

Medium:   95mm (ASTM D6319-10:  95)

Large:   105mm (ASTM D6319-10:  110)

Extra Large:  115mm (ASTM D6319-10:  120)

Tolerance:  +/- 5mm (ASTM D6319-10:  +/-10)

All sizes:  240mm minimum

Range:  240-250mm

(ASTM D6319-10:  230 minimum)

Cuff:  0.05mm minimum

Palm:  0.06mm minimum (ASTM D6319-10:  0.05mm minimum)

Finger:  0.07mm minimum (ASTM D6319-10:  0.05mm minimum)

Before Aging

• Tensile Strength (Mpa): 14 min
• Elongation %:  500 min

After Accelerated Aging (166 +/- 2 hours @ 70 +/- 2 ° C

• Tensile Strength (Mpa): 14 min
• Elongation %:  400 min

Gloves shall meet requirements as stipulated in ASTM D6319-10

Method of test shall be in accordance with ASTM D 5151-06

Powder Residue is tested as per ASTM D 6124-06

Symmetri Gloves Powder Residue is < 2mg/glove