Nitrile industrial Gloves Specifications

• Product:   Powder Free Nitrile Gloves, Non-sterile; Industrial Diamond Grip Texture; Ambidextrous; Disposable; M = 8.6 +/- 0.2gm 
• Material:   Acrylonitrile Butadiene Synthetic Rubber Latex 
• Cuff:  Beaded
• Sizes:   Small, Medium, Large, Extra-Large 
• Standard:    Meets the requirements of ASTM D412 / D3767 (Standard specification for Nitrile Gloves) 
• Packaging:   100 pieces gloves (by weight) per dispenser box 

Gloves are sampled at random and inspected in accordance with ISO9001:215 based on batch size. The inspection levels and Acceptance Quality Levels (AQL) shall conform to specification as shown below or as agreed between the purchaser and the supplier.

Samples are inspected/tested as per ASTM D6319-10.

Characteristic Requirements

     Dimension:  Inspection Level S-2, AQL 4.0

     Freedom from holes:  Inspection Level G-1, AQL 1.5

     Physical Properties:  Inspection Level S-2, AQL 4.0

Visual Defects

     Major:  Inspection Level G-1, AQL 2.5

     Minor:  Inspection Level G-1, AQL 4.0

     Packaging & Labelling:  Inspection Level S-2, AQL 4.0

Small:   7.6  +/- 0.2g; Range 7.4-7.8g

Medium:   8.6 +/- .0.2g:  Range 8.4-8.8g

Large:   9.8 +/- 0.2g; Range 9.6-10.0g

Extra Large:  10.9 +/- 0.2g; Range 10.7-11.1g

Small:   85mm (ASTM D6319-10:  80)

Medium:   95mm (ASTM D6319-10:  95)

Large:   105mm (ASTM D6319-10:  110)

Extra Large:  115mm (ASTM D6319-10:  120)

Tolerance:  +/- 5mm (ASTM D6319-10:  +/-10)

All sizes:  240mm minimum

Range:  235-245mm

(ASTM D6319-10:  230 minimum)

Cuff:  5mil / 0.09mm minimum (ASTM D412 / D3767:  +/-1mil  +/-0.02mm minimum)

Palm:  8mil / 0.16mm minimum (ASTM D412 / D3767:  +/-1mil  +/-0.02mm minimum)

Finger:  9mil / 0.20mm minimum (ASTM D412 / D3767:  +/-1mil  +/-0.02mm minimum)

Before Aging

• Tensile Strength (Mpa): 14 min
• Elongation %:  500 min

After Accelerated Aging (166 +/- 2 hours @ 70 +/- 2 ° C

• Tensile Strength (Mpa): 14 min
• Elongation %:  400 min

Gloves shall meet requirements as stipulated in ASTM D6319-10

Method of test shall be in accordance with ASTM D 5151-06

Powder Residue is tested as per ASTM D 6124-06

Symmetri Gloves Powder Residue is < 2mg/glove